Tripp-Lite B127A-1A1-BDBD Manual De Operación página 10

USB/IR/Toslink Controls
The extender kit provides the following functional controls:
• USB 1.1 – One USB Micro-B input at transmitter, dual USB-A outputs
at receiver
• Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter and receiver
• Toslink output at receiver and transceiver
(Optional) Connect the included IR-OUT cable to the transmitter unit's
IR-OUT port. Place the sensor on the IR-OUT cable in an unobstructed
area within clear view of the device being controlled. Then connect the
included IR-IN cable to the receiver unit's IR-IN port. The IR-IN cable will
communicate the desired command via the transmitter's IR-OUT cable.
Note: The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray™ player, etc.).
(Optional) With a user-supplied USB Micro-B cable (such as Tripp Lite
U050-XXX Series USB cable), connect to the transmitter's Micro-B port.
Then connect a keyboard and mouse to the available USB-A ports on the
receiver unit.
(Optional) Connect a Toslink cable (such as Tripp Lite's A102-XXM Series
cables) to a set of speakers, an audio receiver or other audio system
equipped with Toslink digital outputs.
-09-170-Book.indb 10 -09-170-Book.indb 10
10
4/6/2021 3:50:07 PM 4/6/2021 3:50:07 PM