Be Cool LIFT Instrucciones página 13

1 OPEN THE PUSHCHAIR:
1. Release the folding lock on side of pushchair.
2. Step down the unfolding tab all the way down by foot until pushchair fully opened.
2 FRONT WHEEL UNIT ASSEMBLE & SWIVEL LOCK:
1. To assemble front wheel unit simply push front wheel unit into vertical axle & make sure it lock into position.
2. To remove front wheel unit simply push metal tab above on wheel to remove it.
3. Push down lock tab to lock the swivel.
4. Pull up lock tab to release the swivel lock.
3 PARKING DEVICE OPERATION
1. Push down the one step brake lever on right side to lock the brake.
2. Pull up the one step brake lever to release the brake.
SEAT HARNESS OPERATION
4
1. Place shoulder harness over child's shoulders.
2. Place crotch strap over child's legs.
3. Fasten restraint system buckles by pushing buckles into crotch strap latch. Pull on belt to be sure both buckles are
fastened to secure child safety.
4. To safely secure child, adjust shoulder straps and waist belt snugly around child.
5 HOOD OPERATION
1. Pull up the hinge to close the hood & push down the hinge to open the hood.
2. Push or pull the hood tab in to the base to install or remove the hood.
LEG REST ADJUSTMENT
6
1. Pull up the leg rest to horizontal position.
2. Pull adjust tab forward to release leg rest to lower position.
7
ADJUSTING THE SEAT RECLINE
1. Pull up recline release tab to adjust seat back to desire recline positons.
2. To erect seat back, simply pull up seat back to upright positons.
FOLD THE PUSHCHAIR
8
1. Pull up the hinge to close the hood.
2. Adjust seat back to upright position.
3. Push both sides 2nd lock button until hear "CLICK" sound to release both 2nd lock.
4. Pull up the the main lock release handle ( push handle in the same time ) to unfolding until lock into folding position.
9
BUMPER BAR
1. Push under side release tab to remove bumper bar.
2. To install bumper bar simply push into place.
10
CARRY HANDLE
1. To carry pushchair, simply hold the carry handle on side of pushchair as shown.
11
CUP HOLDER
1. To install or remove cup holder simple push down or pull up the cup.
12
ADJUST THE SEAT BELTS TO FIT THE CHILDREN WHENEVER THEY USE THE PUSHCHAIR.
1. The two side fastening points of the seats can be used to at-tach an additional harness. Your pushchair is approved for
new born babies. To fit the belts on your baby when he is under 6 months old, pass the shoulder straps through the
lower holes and fasten the shoul-der protector pads using the Velcro. When your child is over 6 months old, pass the
straps through the holes that are most comfortable for the child.
MAINTENANCE
Do not expose the upholstery material to the sun during long periods.
Wash plastic parts with warm water and soap, then dry all components thoroughly.
The cover can be removed for washing.
Regularly check the brakes, harnesses and fastening elements that may suffer wear and tear through use.
GB
13