Before First Use - Philips AVENT SCF291/00 Manual De Instrucciones

8aaaEnglish

Before first use

When you use the appliance for the first time, we advise you to let it complete one
sterilization process with empty baskets.
1 Use a clean baby bottle and pour exactly 130ml/4.5oz distilled water directly into
the water reservoir of the base.
Tip: Using distilled water can minimize the formation of limescale on heating
element. For more information on limescale, see section "Descaling".
2 Place the large basket on the base.
3 Place the bottom plate in the large basket.
4 Place the small basket on the large basket.
5 Place the lid on top of the small basket.
6 Put the plug in the wall socket.
7 SCF291: Press the power on button to switch on the
appliance.
SCF293: Turn the on/off button to "Sterilize" mode.
Then press it to switch on the appliance.
Note: If you plug in the appliance after you have pressed the
power on button, the sterilizer starts working immediately.
You can switch it off by pressing power off button.
Caution: The base, the baskets and the lid become hot
during or shortly after operation.
SCF291
• The on/off indicator light lights up to indicate that the appliance starts sterilizing.
• When the sterilization process is finished, the light goes off and the appliance
switches off automatically.
SCF293
• All of the progress indicator lights flash to show the appliance is sterilizing.
• When the sterilization process is finished, the lights go off and the appliance
switches off automatically.
• You can turn the on/off button to "Dry" mode to dry the appliance. It takes
approximately 30 minutes to complete the drying cycle.
8 After the appliance has cooled down completely, remove the lid, the small basket,
the bottom plate, the large basket and wipe them dry.
Note: When you remove the large basket from the base, be aware of the remaining
water on the base drip tray.
Englishaaa9
SCF291
SCF293
1
2