Mopar RAM Bed Manual De Instrucciones página 2

5/32"
(25mm)
(4mm)
1
Use template (part of cardboard
packaging) to measure 7" from each end
of the three long tubes and mark with tape.
Tape is to be used as reference point.
3
8
Slide tubes in freely... do not force.
They will not insert all of the way to
tape. The tape will be used later to
measure and center tubes.
5
August 15, 2014
Drill at 3 indentations
.
already in pillars
1"
www.mopar.com
2
9
Insert tubes only about 3", not
all the way to tape line. The final
depth will be adjusted later.
4
8
6
Left side shown, opening in
bracket faces Back of vehicle.
1
3
9
2
2
6X
30 in-lbs
(3Nm)
7
K6862014