Use And Operation - oneConcept 10032346 Manual Del Usuario

EN
12

USE AND OPERATION

Assembling and Watering
1 Assembling castors: put the appliance on a flat surface, take out the wrench from
foam box, then assemble the castors.
2 Watering: pull 1/3 water tank, then add clean water.
Important notes on the tank:
• Pay attention to the level of water tank when add water.
• The level of water tank should not over "MAX" scale at any time, when humidifying,
the total level of water tank should not below "MIN" scale.
• Put ice or frozen ice box to the water tank if you want to strengthen the efficiency of
cooling. But the total level of water tank should not over "MAX" scale.
Operation and Functions
1 ON/OFF on control panel : Press the key, turn on the appliance, second press, shut
it down .
2 Speed: press this key, start the appliance, the corresponding function changes as
follows when you press the key serially: LOW - MEDIUM - HIGH - LOW.
NOTE: Pay attention to the indications on the display.
3 Wind type: press this key, you can choose the normal wind, natural wind and
sleeping wind .
4 Swing : press this key, the wind direction can swing flatly, and the swing indicator
light is on. It cancels this function when you press again.
NOTE: You also can swing the transverse blades by your hands, choose the wind
direction up and down.