Tripp-Lite PDU3EVN3L2130 El Manual Del Propietario página 11

Using the LCD Touchscreen
Scrolling Through LCD Touchscreen Options
Network
Network
Input Phase
Load Bank
Outlet
Configuration
Environment
Mobile Access
21-03-434-93349E.indb 11 21-03-434-93349E.indb 11
After the system initializes, the Network panel will appear. Use q
on the touchscreen to display the menu. Touch the desired menu
option to select. Available options will vary based on the PDU and
peripherals.
Input Phase
Press Input Phase on the drop down menu to view the status of
each phase. The amperage and voltage for L1, L2 and L3 will be
displayed, as well as the Phase Unbalance %.
INPUT PHASE REPORTED
L1 – L2
L2 – L3
L3 – L1
Load Bank
Press Load Bank on the main menu to view the status of each
of the PDU's load banks. The bank number will be displayed in
addition to total amperage, wattage and voltage per bank, as well
as the total power in Watts. Use
available banks.
LOAD BANK
Bank 1
Bank 2
Bank 3
11
Network
Press Network on the drop down
menu to view the PDU network
details. Press the and
between screens. Details displayed
include the IP address (IP), Subnet
Mask (Mask), Gateway (Gate), MAC
Address (MAC), Device Name, Model
and Serial Number. Press q to go
back to the main menu.
LCD REFERENCE
L1
L2
L3
and to scroll through the
LCD REFERENCE
1
2
3
to move
4/5/2021 4:11:49 PM 4/5/2021 4:11:49 PM