CLEANING AND MAINTENANCE
By ensuring proper cleaning and maintenance
of your oven you can have a significant influ-
ence on the continuing fault-free operation of
your appliance.
Before you start cleaning, the oven must
be switched off and you should ensure
that all knobs are set to the position OFF.
Do not start cleaning until the oven has
completely cooled.
Oven
● The oven should be cleaned after every
use. When cleaning the oven the lighting
should be switched on to enable you to
see the surfaces better.
● The oven chamber should only be washed
with warm water and a small amount of
washing-up liquid.
● After cleaning the oven chamber wipe it dry.
Important!
Do not use any abrasive agents, harsh de-
tergents or abrasive objects for cleaning.
Only use warm water with a small addition
of dishwashing liquid to clean the front of
the appliance. Do not use washing pow-
ders or creams.
Replacement of the oven light bulb
In order to avoid the possibility of an
electric shock ensure that the appliance
is switched off before replacing the bulb.
● Set all control knobs to the position
disconnect the mains plug,
● unscrew and wash the lamp cover and
then wipe it dry.
● unscrew the light bulb from the socket,
replace the bulb with a new one – a high
temperature bulb (300°C) with the follow-
ing parameters:
- voltage 230 V
- power 25 W
- thread E14.
● Screw the bulb in, making sure it is prop-
erly inserted into the ceramic socket.
● Screw in the lamp cover.
/ 0 and
l
59