Mounting The Access Point; Wall Mounting - 3Com OfficeConnect 3CRWE454G75 Guia De Inicio Rapido

4. Mounting the Access Point

The Access Point can be mounted using the following methods:
•

Wall mounting

•
Tabletop mounting (horizontally, or vertically using the supplied cradle)
Tabletop Mount (horizontal)
.
CAUTION: The Access Point is intended for indoor use only. Do not install the
Access Point outdoors unless you install it in an appropriate outdoor enclosure.
Wall Mounting
To mount the Access Point to a wall:
1
Locate a position on the wall which is free of obstructions.
2
Screw two mounting screws into the wall 85 mm apart.
3
Connect the Ethernet cable and power cable to the ports on the side of the Access Point.
4
Align the holes on the back of the Access Point with the screws and hang the Access Point
on the screws.
.
Wall Mount
Tabletop Mount (vertical)
4
85mm