Features; Before First Use; Operation - Nesco BL-50 Manual De Instruccion

Cover
Cutting
Button
Ice Button
Base
1. Read and understand all instructions and keep for future reference.
2. Remove all packaging.
3. Remove the Jar from Base (see Care and Cleaning section). Wash the Jar, Lid and
Measuring Cup in warm soapy water. NOTE: Be careful when handling the Jar, blades
inside are sharp.
4. Rinse, Dry and Re-assemble blender parts.
5. Wipe the Blender Base with a damp cloth. DO NOT IMMERSE THE BLENDER BASE IN
WATER OR ANY OTHER LIQUID.
1. Place base on a flat, stable surface.
2. Be sure the unit is disconnected from electrical outlet before installing or removing any
components.
3. Place Jar onto Base, aligning tabs, and turn slightly clockwise to lock into place. Unit has a
safety design which will not operate if the Jar is not positioned properly onto the Base.
4. Fill Jar with desired foods. Do not exceed Maximum fill line (Max = 50 oz. / 1500mL).
5. DO NOT USE BLENDER WHILE EMPTY OR WITHOUT JAR AND COVER IN PLACE.
6. Place cover onto Jar and push firmly to secure.
7. Install Measuring Cup and turn to lock. If blending hot foods, remove measuring cup from
cover while blending.
8. Set the control dial to 'OFF' and connect the cord to 120V electrical outlet.
9. Turn the knob to 'ON' position. Backlight will turn on, indicating power is ON.
10. For auto settings, press PULSE, ICE or SMOOTHIE to operate in corresponding mode.
11. To adjust speed, turn control dial between Minimum (lowest speed) and Maximum
(highest speed) to choose desired speed setting.
NOTE: DO NOT OPERATE UNIT CONTINUOUSLY FOR MORE THAN 2 MINUTES.

FEATURES

Jar
Blades
Pulse

BEFORE FIRST USE

OPERATION

2
Measuring Cup
Smoothie
Button
Control Dial