Technical Data; Product Description - BDS 2883 Manual Del Usuario

TECHNICAL DATA

Max. capacity: 20,000 kg
Size of foot: 223 x 133 mm
Min. height: 260 mm
Max. height: 510 mm
Adjustable height: 80 mm
Stroke: 170 mm
Working pressure 8 to 9 bar
Weight 16.3 kg

PRODUCT DESCRIPTION

Air Actuated Hydraulic Hand Jacks are designed for lifting, but not sustaining, loads ranging from up
to 20 tons. They can be used vertically or angled to 5 degrees from vertical position. After lifting, loads
must be immediately supported by appropriate means. Each model is suitable for use in an
appropriately rated and designed vertical or bench press structure. These jacks are not recommended
for use in lifting or positioning houses and 1 or other building structures. These jacks comply with
applicable ASME / ANSI Standard. For air actuated use, ensure that your air source can dedicate is
recommended.
ATTENTION
Save these instructions.
For your safety and the safety of others around you, read carefully before attempting to assemble,
service or use your jack. Observe all safety and warning information. Always wear safety glasses
when operating this product. Failure to comply with the information contained within could result in
severe, even fatal injury and/or property damage.
WARNING
This lifting device only it is designed to lift part of the total vehicle (one wheel or axle).
Always wear safety glasses when using this equipment.
Center the load on saddle before lifting.
Never work on, under or around load until it is properly supported.
Transfer the load immediately to appropriate jack stands.
Do not use this product for any purpose other than that for which it was intended.
It is owner's responsibility to keep labels and instructional material legible and available.
Replacement labels and manuals are available from the manufacturer.
Failure to heed these and all other warnings pertaining to this product can result in sudden loss of
lifted load resulting in death, personal in jury or property damage.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Air Hydraulic Jack | 20 t
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 2883
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed