Power Supply; Overload Indication - FIRST AUSTRIA FA-8017 Manual De Instrucciones

INSTRUCTION MANUAL
ELECTRONIC PERSONAL SCALE
Your new personal scale has been designed to accurately indicate your weight gain or loss over a period of
time and should give many years of service under normal use.
SPECIFICATIONS
• 6mm safe tempered glass platform
• Capacity: 150kg
• Division: 100g
• Automatic zero resetting
• Automatic switch off
• Over load indicator

POWER SUPPLY

1. The scale is solar power supply. It can keep working in the light (sunlight or lamplight). LCD shows a
flashing „0" when standby. DO NOT cover the solar power panels during using.
2. If the light is too weak, scale will shut off due to low power. Please move the scale to other place with
stronger light, wait until the scale to switch on again to weigh.
3. it is suggested to use the scale in the light not less than 70lx.
OPERATION
Step 1: To make sure accuracy, place the scale on a hard, flat floor and avoid carpet or soft
surface.
Remark: If the scale is one of our „slim" series (indicated on package), make sure to put it on
hard surface such as marble, floor tile etc., and make sure no foreign bodies beneath
the scale before weighing.
Step 2: Make sure to put the scale in the light (sunlight or lamplight), and solar power panels
are not covered. If LCD does not show a flashing „0", please turn on the lamp or
move the scale to other place with light not less than 70lx. the scale will switch on
again after 60-90 seconds (the stronger the light is, the shorter time it needs).
Step 3: Enter standby mode, LCD shows a flashing „0".
Step 4: Step onto the scale gently. LCD shows „—", meaning weighing is proceeding. Wait
for about 3 seconds until the scale displays weight reading.
Step 5: LCD will show weight reading for about 12 seconds.
M_8017_v02.indd 2-3
2
TO CONVERT WEIGHT UNIT
If the scale is with both measuring system of Metric (kilograms) and Imperial (pounds,
stones), you can convert weight unit as follow:
A. Find unit switch on the back of scale.
B. Pull up and down the unit switch to convert scale unit between kg-st-lb.

OVERLOAD INDICATION

Scale overload, (max. weight capacity is indicated on the scale).
please step off to avoid damage.
RE-TEST
Display „C" when you step off the scale, means this weight reading with error. Please re-test.
ADVICE FOR USE & CARE
• The glass will be slippery when it is wet. Keep it dry!
• Keep standing still during the course of weighing.
• This product can only used by static pressure. Avoid breaking the glass by striking, shocking or dropping.
• Clean your scale with a damp cloth but avoid water getting inside the scale. Do not use chemical cleaning
agents. The sticking part of the glass to the metal should not be soaked by water.
• Keep your scale in a cool place with dry air instead of humid or hot places.
• Keep your scale in horizontal position instead of standing on side.
• This scale can only be used for weighing human body. Do not use it for commercial purpose.
• Treat your scale with care – it is a precision instrument. Do not drop it or jump on it.
• Do not use it for commercial purpose.
3
13-4-9 上午9:20