HyLoft 00540 Instrucciones De Montaje página 3

ATTACH SUPPORT BAR ASSEMBLIES
If necessary, adjust length ofSupport Bar Assemblies(C) by removing Hex Bolts & Hex Nuts as shown.
Overlap downrods to the length desired & reinstall Bolts & Nuts.
PLACE AND ATTACH GRIDS
3A Lay both 15" Wire Grids (A) on left & right sides
of Support Bar Assemblies(C) and attach as
shown. Note: Long grid wires go on the bottom.
E
lled.
oper ly insta e toda la
if impr or asum nte.
kg) or prad rrect ame on.
lbs. (114 El com lado inco ation
eds 250 on liabi lity. está insta ad del limit
load exce ation O si bilid été insta llée
lity if ts for limit s (114 kg). la resp n'a pas onsa bilité .
mes all liabi de 250 men libra n para si l' u nité de resp onsa ing
r assu n docu exce la insta lació kg) ou ation nts Pend
Purc hase insta llatio el peso tos de s (114 l a limit nal Pate
Plea se see bilid ad si men de 250 livre n pour Inter natio
onsa r los s excè docu nt l' i nsta llatio US &
resp por favo si le poid erna 6409 031;
Vea bilité ts conc ; 6435 105;
resp onsa les docu men 0353
me tout e la ulter 7957 ; D47
eur assu llez cons ; D47
L' a chet Veui ; D45 9926
ctem ent. D41 6152
corre nts:
US Pate
F
You have now completed the installation and are ready to load your new HyLoft Storage Unit.
(Maximum 250 lbs. per 45" x 45" unit, evenly distributed).
Place the Sticker(K) provided on a support bar for easy reference information.
Periodically (at least annually) check all connections to ensure that they remain tightly fastened
Installing Two HyLoft 45 x 45 Units:
Follow the instructions above. Multiple Units may be joined together by using Plastic TieStraps(J)
provided.
four-wire clusters
nearest downrods
Sticker(K)
Ceiling Joist
Remove
Screws
to
Adjust
Downrods
to Desired
Length
3B
Lay 13" Wire Grid (B) on top of
Support Bar Assemblies(C), between
the two 15" grids (A), and Bolt Together
using 2 bolts (G), washers (I) and nuts
(H) on each side.
I
H
G