Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting your replaceable earpieces and checking fit
of the earphones
Medium-sized rubber earpieces are attached to the ear-
phones at shipment. If these do not fit your ears, replace
them with the Small or the Large earpieces. It is important
to have the correct and comfortable fit; an incorrect fit will
degrade the audio function of your headphones.
Using your in-ear headphones
1. Connect the headphone cable to the extension
cable/adapter if needed, making certain the plug is
firmly seated. (Use extension cable/adapter with
3.5 mm stereo mini-plug to connect to MP3, CD player,
DVD player, computer, and other audio devices
equipped with a 3.5 mm output jack.)
2. Connect the headphone cable (or extension cable) to
the headphone jack of your audio device.
3. Wear the left earphone (marked L) in your left ear, and
the right earphone (marked R) in your right ear. Insert
the earpiece on the earphone into your ear so it fits
snugly and comfortably. If fit is not correct, please see
Selecting your replaceable earpieces above. Do not
push beyond the ear canal opening.
Warning: Do not push the earphone sleeve beyond the
ear canal opening.
4. Wear the headphones over the ear with the Y cable
toward the front or back. Use the adjustable sleeve to
tighten the cable.
5. Turn on your audio device. (Volume should be set at a
low level at first; adjust as necessary on audio device.)
Check to make certain the headphones fit correctly and
that there is a good seal between the ear canal and the
rubber earpiece on your earphone; see Selecting your
replaceable earpieces above.
All manuals and user guides at all-guides.com
After using your in-ear headphones
•
After you have finished using your in-ear headphones,
store them in included protective carrying case.
•
To clean the earphones, wipe with a clean, soft cloth.
Do not use solvents.
•
For periodic cleaning of earpieces, remove from
earphones and wash with warm water. Make certain
earpieces are completely dry before reinstalling on
earphones. Check for any obstructions.
•
Earpieces will wear over time. Replacement earpieces
are available from Audio-Technica dealers.
Specifications
*
Type
Dynamic
Driver Diameter
11.5 mm
Frequency Response
18 – 18,000 Hz
Sensitivity
100 dB/mW
Impedance
32 ohms
Weight (without cable)
5 g (0.18 oz)
Cable
110 cm (3.6'), Y-type
Connector
3.5 mm TRS stereo
with locking collar
Accessories
Extension cable/adapter with
3.5 mm connector; protective
hard carrying case; soft
pouch; interchangeable
earpieces (S,M,L); ear-con-
forming foam tips
*
Specifications are subject to change without notice.
3
EN
Publicidad
