ALFA Next 30 Iron Manual Del Usuario página 9

NEXT 30 Iron Mod.7806
Self-Cleaning
This function removes the scales and minerals built up in the Steam Chamber. The iron will remain
in the best condition if this function is performed at least once a month or more regularly depending
on the hardness of the water used.
1. Fill the iron as described in the section of How to Fill Water, Fill the water tank up to half.
2. Set the Steam control knob to .
2. Place the iron on a surface in upright standing position.
3. Connect the iron to mains supply outlet, pilot light will glow for a second then goes off.
4. Turn the Temperature Dial in clockwise direction to 'MAX' position.
5. Pilot light will glow to indicate the iron is heating up.
6. Pilot light will go off when the required temperature is reached.
7. Wait for one more cycle; pilot light glows and goes off.
8. Turn the Temperature Dial in anti-clockwise direction to 'MIN'.
9. Disconnect the iron from mains supply outlet.
10. Hold the iron horizontally over a sink.
11. Press and hold the Self-Cleaning button.
12. Steam and boiling hot water will emit from the holes on the sole plate which contains scales
and minerals that deposited in Steam Chamber in previous uses.
13. Gently move the iron back and forth until the water tank is empty.
14. When Self-Cleaning is completed, release the Self-Cleaning button.
15. Rest your steam iron back on its heel rest and allow to fully cool down.
16. Wipe the soleplate with a cold damp cloth.
Caution: Keep skin/body away from the hot water.
Anti-Drip
1. Anti-drip system, which is designed to prevent the water escapes from
the soleplate automatically when the iron is too cold.
2. During use, the anti drip system may emit a loud clicking sound,
particularly during heat-up or whilst cooling down. This is perfectly
normal and indicates that the system is functioning correctly.
FIGURE 9