FanJu FJ3365-Norcc Manual Del Usuario página 10

New Waxing
moon half-moon
7. TEMPERATURE, HUMIDITY AND COMFORT DISPLAY
7.1 °C or °F temperature display
 The temperature is displayed either in °C or °F. Press "MODE" for 3 seconds
start to setting and follow it, until the °C
or °F format display starts to flash, now use "+" and "-" buttons to select
7.2 Current Temperature and Temperature Trend Display
 After you insert the batteries, the weather station measures the current
temperature. The trend display shows a neutral temperature course
The further course of the trend display is determined as follows:
 If, after an hour, the temperature is more than 1°C higher than the value
measured first, then a positive course is displayed
 If, after an hour, the temperature is more than 1°C lower than the value
measured first, then a negative course is displayed
 If the temperature does not change within an hour, then the upward or
downward pointing arrow becomes a horizontal arrow. The measured
temperature is then taken as the neutral value from which further prognoses
are made.
7.3 Outdoor Temperature & Frost Alert Settings
 Press and hold down the "
Temperature Alert" starts to flash
 The icon of Hi limit of the Temperature alarm starts to flash. Use the "+"
and "-" buttons to set the required
maximum temperature. Press "
 The icon of the Lo limit of the Temperature alarm starts to flash. Use the
FJ3365-Norcc Manual
Waxing
Half-
full
moon
moon
ALERT
" button for 2 seconds until the icon for the
ALERT
10
Full Waning
Half-
full
moon
moon
moon
.
.
" to confirm your setting.
Waning
half-moon
.