Cd Player Operation - auna 10033900 Manual Del Usuario

EN
Use only Digital Audio
CDs with the symbol.
24

CD PLAYER OPERATION

Handling of compact discs
• Never write on a CD or attach any sticker to the CD. Always hold the CD
at the edge and store it in its box after use with the label facing up.
• To remove dust and dirt, breathe on the CD and wipe it with a soft, lint
free cloth in a straight line from the centre towards the edge.
• Cleaning agents may damage the CD.
• Do not expose the CD to rain, moisture, sand or to excessive heat.
CD/CD-R/CD-RW/MP3 discs
• The player can playback CD/CD-R/CD-RW/MP3 discs that have been
finalised upon completion of recording.
• The player may fail to playback some discs due to poor recording and
wide variation in quality of the discs.
Inserting a disc
1. Pull the right corner of the CD door to open it.
2. Insert a disc on the disc tray with the label side facing up.
3. Close the CD door.
Playing a CD
1. Repeatedly press mode button to select the CD operation mode.
Playback will start automatically from the first track. The track number
and elapsed time will be displayed during playback.
2. Adjust the volume by repeatedly pressing Volume "+"/"-" button.
3. To interrupt playback, press play button .
The symbol  and the elapsed time will flash on the display.
4. To resume playback, press play button again.
The symbol  and the elapsed time will stop flashing.
5. To stop playback, press stop button.
The total number of tracks will appear on the display
Notes:
• The CD door should only be opened when the CD is in stop mode.
• If no disc is loaded into the compartment or the disc is placed upside
down, the display will show "NO".