Operation Of Foam Generator; Basic Operation - Viper DF-100A-EU Instrucciones De Manejo

OPERATION OF FOAM GENERATOR

BASIC OPERATION

Please follow the instructions to achieve the top performance.
1] Installation:
a. Set Viper EZ-DF-17A polisher (A) at the up-right position.
b. Install the foam generator (B) on the handle tube (D) of the polisher and lock the holding handle (C) in position.
c. Connect the foam outlet hose (E) to the fitting on the polisher.
d. Connect the power supply cord (F) to the socket on the polisher rear handle housing.
2] Solution:
Mix the Viper "508" carpet cleaner with water (Ratio 1:15). Pour into the Solution Inlet (5) gently.
NOTE
Solution tank capacity is 6 Liters.
3] Carpet Cleaning:
Set the polisher in working position (lowering the handle). Turn the Foam Adjusting Knob (4) 180°, wait for 3-5 seconds, adjust the
Foam Adjusting Knob (4) for desired foam volume. Turn the Foam Adjusting Knob (4) to 0 position to switch off the machine.
NOTE
DO NOT turn on the Polisher until seeing the foam coming out of the shampoo brush.
14019E (1) 2009-06 A
USER MANUAL
DF-100A-EU
ENGLISH
9