Digital Laser Measure - Bosch Weu PLR 50 C Manual Original

OBJ_BUCH-2326-002.book Page 29 Friday, November 7, 2014 10:15 AM

Digital Laser Measure

Laser beam diameter (at 25 °C) ap-
prox.
– at 10 m distance
– at 50 m distance
Automatic switch-off after approx.
– Laser
– Measuring tool (without measure-
ment)
Weight according to EPTA-Procedure
01/2003
Dimensions (length x width x height)
Batteries
Battery life, approximately
– Individual measurements
– Continuous measurement
Data transmission
Bluetooth®
A) For measurements from the rear measuring-tool edge. The working range increases depending on
how well the laser light is reflected from the surface of the target (scattered, not reflective) and the
brighter the laser point is to the ambient light intensity (interior spaces, twilight). For distances of
less than 20 m a retro-reflective target plate should not be used, as it can lead to measurement er-
rors.
B) For measurements from the rear measuring-tool edge, 100 % reflectance of the target (e.g., a
white-painted wall), weak backlight and 25 °C operating temperature. Additionally, a deviation influ-
ence of ±0.05 mm/m must be taken into account.
C) After calibration at 0 ° and 90 ° with an additional grade error of ±0.01 °/degree to 45 ° (max.).
D) In the continuous measurement function, the maximum operating temperature is +40 °C.
E) At 25 °C operating temperature
F) For Bluetooth® low energy devices, establishing a connection may not be possible, depending on
model and operating system. Bluetooth® devices must support the SPP profile.
G) Bluetooth® deactivated
The measuring tool can be clearly identified with the serial number 6 on the type plate.
Bosch Power Tools
English | 29
PLR 50 C
115 x 50 x 23 mm
3 x 1,5 V LR03 (AAA)
10000
Bluetooth® 4.0 (Classic and Low Energy)
2 609 141 217 | (7.11.14)
9 mm
45 mm
20 s
5 min
0.16 kg
E) G)
E) G)
2.5 h
F)