Belt (Q.tY 3); Hooks For Roller (Q.tY 2); Belt Restraint Clip (Q.tY 6) - RIB KIT JACK 30 SS Manual Del Usuario

NOTE: the belts are to be positioned in correspondence with the fittings on the roller shutter (Fig. 18-19)
A
Belt
NOTE: If the plate cannot be used for securing the belts, use the roller
hooks (Fig. 1 ref. 8), fitting them in the recesses of the fixed roller as
shown in figure 19.
Plate
31
B
Belt
restraint
clips
G
B
C
Fig. 18
Hooks for roller
Belt restraint clip
Fig. 19