SO400/IT ram has been made in RIGHT and/or LEFT version depending on the leaf on which it will be installed. The leaves must be considered from
the internal side (garden).
The SO400/IT cylinder is easily installed on any type of gate, as long as the gate is well balanced.
The SO400/IT cylinder, with stroke 400, has been constructed for gate wings that do not exceed 350 kg in weight and 3 meters in lenght.
2. INSTALLATION
Fix the large plate to the column respecting the measurements shown in the table and position the cylinder perfectly horizontal (check with a sprit-
level) and with respect to its axis (fig.A).
Fix the gear-motor to the large plate "1" using the pin and grub-screw supplied.
Completely extend the stainless steel tube "3" up to the end of its stroke, then screw it back for one turn (at least 1 cm) to make the gate wing close
perfectly.
Fix the small plate "4" to the end of the cylinder using the pin and grub-screw supplied.
Fix the small plate to the gate wing, keeping the cylinder horizontal (check with a sprit-level).
Position the mechanical doorstops in both the open and closed positions (fig.B).
3. MANUAL OR EMERGENCY MANOEUVRE
Operate unlocking device "2" using the key supplied.