Publicidad
Idiomas disponibles
Idiomas disponibles
• Keep the controller and its components in a safe and clean place. Quick oscillations or dropping
the controller into hard surfaces may damage the device and/or its components.
• For product general cleaning, carefully wipe the controller with a damp & clean cloth. Avoid
putting a lot of pressure on the buttons or the surface of the controller.
• If you are not going to use the product for a long time keep the controller in a dry and safe
place, away from liquids, dust and dirt; do not expose it to direct sun light, extreme
temperatures (heat or cold) or air moisture fluctuations.
• Use the product properly and following strictly these instructions.
• Do not disassemble or attempt to repair the device or its components. There are no serviceable
parts inside. Changes or modifications not approved by Ardistel will avoid the user warranty.
Only Ardistel qualified personnel can repair or replace the product and its components.
• Please, keep the device and its components away from children. Children must be ALWAYS
under adult supervision.
• This product is ONLY for HOME INDOOR use only. Recycle it into electronic devices waste, not
into domestic waste.
6. PROBLEM SOLUTIONS QUICK GUIDE
If the controller does not work properly as indicated in this manual, in some cases after a console
software upgrade, we recommend you try the solutions given below:
SOLUTION 1: After some major upgrades of the console software, it is possible that the option to
use PRO controllers in the console is disabled; then you will need to re-enable it after the console
is updated. Please follow the steps indicated to enable the support of using PRO controllers again:
• In the console settings menu, go to SETTINGS menu, and inside this menu select CONTROLLERS
AND SENSORS, and check that the option for supporting Pro Controllers is enabled, because this
option is disabled in factory settings or after a console upgrade, and it may be the reason why
the controller is not detected.
SOLUTION 2: If you already checked that previous option is enabled and the controller still does
not work, it could be a problem of lack of space in internal memory of the console, so we
recommend you follow these steps:
• Disconnect the controller, free up some space in the internal memory of the console, remove
any microSD card (if you have any inserted) and try to re-connect the controller to see if the
problem is fixed.
If you require further assistance, please contact our customer service team in:
soporte@ardistel.com
6
Publicidad
