Personal Protective Equipment (Ppe) - Gewiss JOINON WALLBOX I-CON DLM Manual De Uso E Instalación

Potential hazards for the device
In order to protect the device, observe the following warnings.
Before reconnecting the voltage supply after any duly authorised operation, make sure the device is ready to start working.
Then, connect it following the instructions in the manual.
Do not touch the boards or the electronic components; the more sensitive components may get damaged or be destroyed
by static electricity.
Do not disconnect or connect any terminal while the device is operating. Disconnect and check for the absence of voltage
before performing any operation.

3.2. PERSONAL PROTECTIVE EQUIPMENT (PPE)

When working on the device, use at least the following items of safety equipment.
Name
Safety footwear
Helmet
Helmet with a face mask
Work garments
Dielectric gloves
The equipment or devices used for operations with the system energised must have at least category III-1000 Volt insulation.
If the regulations in the location of installation require other types of personal protective equipment, the equipment must be
integrated in a suitable manner.
In accordance with UNE-EN-ISO 20345:2012 or the latest edition published
In accordance with EN 397:1995 or the latest edition published
In accordance with UNE-EN 166:2002 or the latest edition published, if there are any live
elements that can be directly accessed.
Close-fitting and non-flammable, in 100% cotton
In accordance with EN 60903:2005 or the latest edition published
Explanation
39