COX M7810A Guía Del Usario página 11

4. Aim the remote control at your TV/VCR
Combo and press POWER once. The device
should turn off. If it does not respond, repeat
steps 2-3, trying each code listed for your brand
until you find one that works. If it still does not
work, try searching for the code (see Searching
For Your Code on page 12).
5. If you've located a TV/VCR setup code that
works your TV/VCR Combo and a separate
TV code is also listed, you'll need to program
this code into the remote control to access
volume control (see Programming Device
Control on page 9).
If there is no separate TV code listed, you will
need to perform the following steps to access
volume control:
a. Press and hold SETUP until the DVD key
b. Enter 9 - 9 - 3. The DVD key will blink
c. Press DVD once. The DVD key will blink
6. For future reference, write down each work-
ing device code in the boxes below:
TV/VCR
TV (if used)
blinks twice, then release SETUP.
twice.
twice.
11