Skil 2354 Instrucciones De Funcionamiento Y Seguridad página 11

SM 1619X09152 06-14_2354 USB 6/3/14 10:15 AM Pag
and cord may result in electric shock or fire.
9. Disconnect the charger by pulling the plug
rather than the cord. Do not operate charger
with damaged cord or plug; have them
replaced immediately. Damaged plug or cord
may result in electric shock or fire.
10. Do not disassemble charger or operate the
charger if it has received a sharp blow, been
dropped or otherwise damaged in anyway.
Incorrect reassembly or damage may result in
electric shock or fire.
11. Before each use, check the battery
charger, cable and plug. If damage is
detected, do not use the battery charger.
Never open the battery charger yourself, take
it to a Skil Factory Service Center, or qualified
serviceman only using original spare parts.
Incorrect reassembly may result in electric
shock or fire.
12. Do not use attachments not recommended
or sold by Skil. Using attachments not
recommended may result in electric shock or
fire.
13. Unplug tool from charger when battery in
tool is fully charged. Tool left plugged in the
charger over a long period of time could lead to
tool damage and fire.
14. Unplug charger from outlet before
storage, attempting any maintenance or
11