Special Settings - NEO FRESNELED COLOR Manual De Usuario

SPECIAL SETTINGS

•
SET: This menu allows the user to adjust key op-
eration settings for this fixture.
•
Select UPLOAD to upload custom programs
from the current MASTER unit to the SLAVE units.
•
In order to reset custom modes to default values
select <REST>.
•
COLOR: is for activate/unactivate the color cali-
bration functions. When <RGBW> is selected,
RGB=255, 255, 255 the color is displayed as cali-
brated in CALIB. C--RGBW. When <COLOR> is
set <OFF> on RGB=255, 255, 255, the RGB val-
ues are not adjusted and the output is most pow-
erful. When <UC> is selected, the RGB output are
adjusted to a standard preset universal color
which balances fixtures from different generations.
•
Select <DIM1>, <DIM2>, <DIM3> or <DIM4>
for different dimming speeds. <DIM4> is the slow-
est dimming speed).
•
PERF: this setting allows the user to select the
performance characteristics of the fixture.
•
MCON: This function allows the user to select
whether the fixture will send DMX data to other
fixtures during stand-alone operation. The <MAST>
setting allows data to be sent to Other fixtures.
The <SELF> setting is default and will not send DMX
data to other fixtures.
P. 10
FRESNELED COLOR
ENGLISH VERSION
•
<PWM_RATE> is PWM reflesh rate bottom, press
UP/DOWN to choose <600Hz>, <1200hz>,
<2000hz>, <4000hz>, <6000hz>, <25000hz>.
NOTE: With reflesh rate increased, gray rate
of dimmer will be reduced, (that means high re-
flesh rate, low gray rate, when its <4000hz>, CV3
is invalid, when its <25000hz>, CV1, CV2, CV3
are invalid, so please lower PWM rate to increase
gray rate innecessary.
•
FULL POWER CCT: is the color temperature
choose bottom, press UP/DOWN to choose un-
der full power <3200k>, <4200k>, <5600k>,
<1000k>, can be chosen, when choose
<COLOR>, <3200K>, <4200K>, <5600>,
<10000K> are not work, but choose <NORMAL>.