Champbell Hausfeld PW1876 Instrucciones De Montaje Y Lista De Piezas

Assembly Instructions and Parts List
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
Specifications
Max Pressure with
Model Standard Lance
PW1876 1300 psi
Assembly Instructions
Figure 1
Garden Hose and System Connection
GARDEN HOSE CONNECTION
INSTRUCTIONS
1. Attach nipple adapter to inlet fit-
ting on the unit (this may already
be attached to the pump).
2. Attach quick connect fitting to gar-
den hose.
Quick Connect Fitting
"A"
Nipple
Adapter
Figure 5 - Garden Hose Connection
© 2000 Campbell Hausfeld
Effective Pressure Maximum
w/Turbo Lance Capacity
1850 psi 1.9 GPM
Figure 2
3. Pull side "A" of quick connect
fitting toward garden hose and
push onto nipple adapter.
4. Push side "A" of quick connect
fitting towards nipple adapter and
release.
SYSTEM CONNECTION
1. Insert lance into the gun and turn
clockwise to positive stop as shown
in Figure 6.
Garden
Hose
Figure 6 - Gun/Lance Connection
2. Ensure that the power switch is in
the "OFF" position.
For parts, product & service information
visit www.campbellhausfeld.com
Electric Pressure
Washer
NOTE: REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
Motor Power
(Single Phase) Voltage
14.5 Amps 120V
Figure 3
3. Attach the high pressure hose and
gun assembly to the unit.
4. Connect garden hose as explained
under Garden Hose Connection
Instructions.
5. Plug the
power cord
into a
grounded
120V outlet
and press
the reset
button as
shown in fig-
ure 7. THIS
MUST BE
DONE EACH TIME THE UNIT IS
PLUGGED INTO AN OUTLET.
Approved
U L
#7P64
PW1876
Maximum Inlet Unit
Water Temperature Weight
100˚F 39 lbs.
Figure 4
Reset
Figure 7 - Grounded
plug/reset button
IN455600AV 4/00