CAUTION
Take caution not to lose the washers, which are required for reattaching the handles.
To attach the handles
RS8000NC_3Door_User-servicing-manual_26ge.indb 4
3. Gently pull the handle out toward the front
by hand.
4. Repeat the above steps on the other
handle.
1. Attach the handle supports on the
brackets.
2. Firmly press the handles at the supports.
Check and make sure the handles are
firmly attached.
NOTE
Make sure there is no gap between the
supports and the door.
English
2020-12-15
9:11:00