Jam Classic Folleto De Instrucciones página 5

D – CALL HANDLING
If a call comes in while rocking out to your music,
quickly press the "play/pause" button once to pick it
up; quickly press again when you're done to hang up.
While on a call, if you want to make it private, press
and hold the "play/pause" button for 2 seconds to
move the call from your speaker to your phone.
If a call comes in and you don't want to pick it up,
press and hold the "play/pause" button for 2 seconds
to send the call to voicemail.
*See the tables on the following pages for complete
button function and LED light indicator interpretation.
PAIR 2 CLASSIC SPEAKERS
1. Turn on speaker 1 (press and hold the volume dial
for 4 seconds to turn on).
2. Pair your device to the speaker by following the
"CONNECTING TO A DEVICE" instructions.
3. Turn on speaker 2 (press and hold the volume
dial for 4 seconds). Do not pair speaker 2 to
your device.
4. On speaker 1, press and hold the backward
and forward button at the same time for
2 seconds. You will hear "ready to pair" while the
speakers are connecting to each other. This will
take a few seconds.
5. Once the speakers are paired successfully
together, you will hear "left channel" and "right
channel" indicating that they are in stereo mode.
6. Press the "play/pause" button on either speaker
to listen to music. Press and hold the backward
and forward button at the same time
for 2 seconds to toggle between stereo and
mono modes.
7. Once paired, your speakers will recognize each
other every time both are turned on. To disconnect
pair 2 mode, press and hold the backward
and forward button at the same time for
2 seconds. This will enter into pairing mode again.
EN
...2s
Note: If either of your speakers has been previously
paired to a device, or will not pair automatically, press
and hold the "play/pause" and buttons on both
speakers for 2 seconds to activate pairing mode. You
will know they have reached pairing mode by the red
and blue blinking light.
...1x
...1x
...2s
...2s
...4s
...4s
5