Operating The Mixer - Dynamic MINI sans-fil Manual Del Usuario

• Operating Voltage ............................................ 230 Volts
• Output Voltage .................................................. 12 Volts
• Full recharge time ............................................... 2 hours
• Simple and convinient
Warning: -Only start the mixer when mixing tube is immersed.
- Shut of the machine before pulling out of the liquid.
- Shut of and unplug the mixer before cleaning.
- When cleaning, protect the motor housing to avoid splashing
liquid to get into the ventilation slots.
③
In order to maintain battery life, unload completely before recharging.
- When inserting an empty battery, charging process must start. Probable cause
not to do so would be that the internal battery temperarure is to high.
- Leave the battery in the charger, the process will automaticaly start when the
internal temperature reaches 0°C to 50°C. The Charger is equiped with electro-
nic sensors in order to avoid possible internal damages to the battery pack.
CHARGER
WALL SUPPORT
②
SECURITY:

OPERATING THE MIXER:

A) To Recharge battery pack:
- Connect AC cord to wall outlet. A green led
will light up, indicating good AC connection.
- Insert the battery pack into the charger slot.
Red led will light up, charging process is
starting.
- It takes 2 hours to recharge completely.
- Recharging process details:
• Rapid charge : Red led open (continious).
• Slow charge : Red led blinking.
• When red led is off, process is finished,
battery will now be maintain fully charge
automaticaly.
9