PEWETA 51.006.093 Manual Del Usuario página 7

The Time zone is used for the countries that can receive the DCF time signal but
l
the time zone is different from the German time.
When the country time is faster than the German time for 1 hr, the zone should be
l
set to +1. Then the clock will automatically set 1 hour faster from the signal time
received.
Note: Second adjusted to zero only.
Press "+"12/24 (B3) button to set the 12/24 hour format at time display mode.
Daily Alarm Setting :
Press "MODE"(B2) to select Alarm Time Display.
l
Hold "MODE"(B2) to Alarm Time setting mode, the hour digit will flash.
l
Press or hold "+"(B3) & "-"(B4) buttons to adjust the alarm time.
l
Press "MODE"(B2) to confirm each setting.
l
Alarm and Snooze Function :
Press "ALARM ON/OFF" (B5) to switch alarm on/off.
l
" " appears if the daily alarm turns on.
l
During alerting, press "SNOOZE" (B1) button to turn on the Snooze function
l
and icon "Zz" flash. The alarm snoozes for 5 minutes, then it alerts again. You
can press "snooze" button to active the snooze function again when alerting.
Simply press other buttons to stop snooze alarm.
l
Thermometer:
Press "°C / °F" (B4) button to select Temperature displayed in Celsius mode/
l
Fahrenheit mode.
Notes/Remarks:
Remove batteries and then insert batteries again to reset the unit if it does not
l
work properly.
Avoid placing the clock near interference sources/metal frames such as computer
l
monitor or TV sets.
Buttons will not function while scanning for DCF time signal unless they are well
l
received or stopped manually.
Never use the clock in bathroom or any other area with high humidity
l
The clock loses its time information when the battery is removed.
l