Kenmore 116.36932 Manual Del Propietário página 18

TOREPLACE DUST BINLID
Replace dust bin lid assembly by placing
back on dust bin with marks on the lid
aligned as shown under Open (For
Emptying) on the back of the dust bin.
Turn This Direction
ToClose For Use Open
(For Emptying)
Closed
(For Use)
Rotate clockwise while pressing downward
so marks align as shown above Closed
(For Use).
Insert dust bin
-.4"
into cleaner. OaUnS_
Lower the dust
bin handle to
lock dust bin in
place.
A noticeable
"click" should
be heard.
The HEPA exhaust filter must be replaced
when dirty. It should be replaced regularly
depending on use conditions.
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number.
Remove exhaust filter cover by pressing
the release tab on the cover and rotating
out from vacuum.
L
i_il
iiii
iI i ii
-4
Remove
the filter
cartridge
from cover.
Place new filter cartridge into cover making
sure that airflow arrow on side of cartridge
points into cover.
18
Place the foam seal of the filter should
be placed against the vacuum cleaner
body.
Seal Against Exhaust
Vacuum Cleaner Filter
Covor_
--Exhaust
Filter
Replace the exhaust filter cover by placing
bottom tabs in slots and rotating in until
cover snaps into place.