Brake Lever - SmartGyro Crosscity Manual De Instrucciones

General adjustments
1º:

Brake lever:

- Pressing the brake lever will cut the electricity of the motor and drive the
friction of the brake discs. With a light touch you will stop your smartgyro
and it is enough to brake well. It is very important to regularly check the
condition of the brakes. These should be aligned and with a good contact
surface. If it detects that it makes an unusual noise (metallic rubbing) or that
it has lost braking powers, check the braking system.
2º:
Brake system adjustment, considerations.
- When the brake disc breaks or deforms, be sure to replace it with a new
disc.
- If the brake disc wears to a thickness of approximately 1.5 mm, so that you
can see the aluminum surface, be sure to replace the brake disc with a
new one.
- If there is grease on the surface of the brake disc, clean it with a cloth.
Otherwise, the braking system may not work properly.
English
Crosscity - User Manual
smartgyro.es smartgyro.es
34 1