Mx Onda MX-CDP2686 Manual De Usuario E Instalacion página 42

4. Installation of the extendable evacuation tube
The extendable evacuation tube has a diameter of 150 mm, if the smoke
outlet hole has a different diameter, you will have to attach a suitable
adapter to the required diameter.
a) Once the upper support of the chimney is installed, remove the two
sections of the chimney.
b) Without extending the flexible tube A, fix it to the outlet of the extractor
hood, you can use plastic ties or metal clamps B. You can also use
silicone or adhesive paste in order to fix and improve the tightness.
c) Connect or plug the extractor hood into the mains socket, if it is hidden
by the chimney. Then mount the first section of the chimney and fix it to
the wall using screws C.
12