Qnubu PRO LION HYDRAULIC 20T Manual De Usuario página 6

CONFIGURATION
QNUBU
RESPIRATOR SETTING:
1
-Temperature setting:
Press the SET button
buttons
-Time settings:
Press the SET button
buttons
-Confirm settings: After finishing setting the time and temperature you
must press SET
The plates will start to heat up
-Countdown: After closing the plates, press the
countdown start button.
TIME
Set button
USE AN ALLEN KEY
TO LOOSEN THE SAFETY
RESPIRATOR AND CHECK THAT
AIR ENTERS INTO THE SYSTEM.
1 time, the display shows "SP", then use the
to increase or decrease.
1 time, the display shows "ST", then use the
to increase or decrease the pressing time.
again to confirm settings.
TEMPERATURE
HOME SCREEN CONF. TEMP.
TEMPERATURE & TIME SETTING:
Increase
button
CRANK INSTALLATION:
2
INSERT THE
CRANK AND FIX IT
WITH THE
CLAMPING SCREW.
DO NOT FORCE THE PRESS!
IF YOU TRY TO APPLY MORE PRESSURE
MAY DAMAGE THE PRODUCT.
CONF. TIME
Countdown
Decrease
button
button