Dsc Address Id; Menu Screen Operation - Plastimo VHF FX-500 Manual De Instrucciones

The ID entering can be done only once. After entering, it can be changed only by PC programming
software.
1. Press [MENU] key, the menu interface is displayed.
2. Press [▲]\[▼] or rotate [DIAL] knob to select "ATIS Setting", then select "ATIS ID Input", then press
[OK], the "ATIS ID Input" screen is displayed.
3. Enter the ATIS ID:
·Press [◄]/[►] to select the desired number.
·Press [OK] to input the selected number.
·Select "←" or "→"to move the cursor, then press [OK].
4. Repeat step 3 to enter all 10 digits.
5. After 10 digits have been input, press softkey [
6. Enter ATIS ID again to confirm.
7. Repeat step 3 to 5 as above.
·After setting, this transceiver can perform normal operation.
NOTE:In the menu item "Radio Info", you can query the set ATIS ID.

■ DSC Address ID

Before using the DSC call related function, the DSC can be set as follows:
1. Press [MENU] key, the menu interface is displayed.
2. Press [▲]\[▼] or rotate [DIAL] knob to select "DSC Settings",
3. Press [OK], the "DSC SETTINGS" screen is displayed.
4. Press [▲]\[▼] or rotate [DIAL] knob to select the submenu item you want to set up.
·The setting items includes Position Input, Individual ID, Gourp ID, Auto ACK, CH Auto SW, Data
Output, Alarm Status, CH 70 SQL Level, Self-Test, Multi-Task.
5. Press [OK] to enter next level menu.
6. Press [BACK] or softkey [
main interface.
Entering the Position and Time
◆
A Distress call should include the vessel's position and time. If no GPS data is received, manually input
the position and Universal Time Coordinated (UTC) time.
·The manual entry is disabled while valid GPS data is received.
·The manually entered position and time is valid only for 23.5 hours, or until turning OFF the transceiver.
1. Display the "POSITION INPUT" screen.
2. Press [▲]/[▼]/[◄]/[►] to enter longitude and latitude.
·Press [◄]/[►] to select desired number.
·Press [OK] to enter.
·Select "←" or "→", or rotate [DIAL] to move the cursor, then press [OK].
·Move cursor to "N" or "S" to select N (North Latitude) or S (South Latitude).
] to set the ID.
] to return to the previous menu. Press softkey [
66
] to return to