Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Chevrolet Silverado Pickup, Suburban 1500 2 & 4WD, Tahoe 1500 2 & 4WD;
GMC Sierra Pickup, Yukon, & Yukon XL 1500 2 & 4WD
Receiver Shown In Proper Position
Equipment Required:
Fastener Kit: 01131-133
Wrenches: 3/4", 18mm
Drill Bits: 1/2"
Drilled Hole
Frame Rail
1
Qty. (4)
Hex Bolt, 1/2"-13 x 1-3/4"
2
Qty. (4)
Conical Washer, 1/2"
NOTE: On most 2006 Suburban and Yukon models, air dam must be trimmed. CONSULT VEHICLE OWNER BEFORE TRIMMING.
1.
Remove the two (2) M12 fasteners from frame rails (for vehicles equipped with factory tow hooks).
2.
Place hitch into position. For those models with OEM tow hooks secure with the provided M12 fasteners and washers. For models without
tow hooks secure hitch with 1/2" fasteners, washers and handle nuts.
3.
Using hitch as template drill two (2) 1/2" holes in frame rails.
4.
Install remaining fasteners as shown.
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
z
2005 Cequent Towing Products
Front Mounted Receiver
Installation Instructions
(Vehicles With Amber Turn Signals)
WILL NOT FIT 2500 SERIES
Fascia
Existing
Access Hole
Tighten all 1/2" GR5 fasteners with torque wrench to 50 Lb.-Ft (68 N-m).
Tighten all M12 CL10.9 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).
CARGO CAPACITY – DO NOT EXCEED
500 LB. OR VEHICLE FRONT GROSS
AXLE WEIGHT RATING. (GAWR)
9000
Drilled Hole
Tow Hook
Models With
OEM Tow Hooks
3
Qty. (4)
Handle Nut, 1/2"
4
Qty. (2)
Hex Bolt, M12 x 1.25 x 35
Sheet 1 of 3
N65023
Part Numbers:
65023
LB. MAX. WINCH LINE PULL
Models Without
OEM Tow Hooks
10-31-05
Rev. A
Publicidad
Manuales relacionados para Cequent Towing Products 65023
Resumen de contenidos para Cequent Towing Products 65023
- Página 1 Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. Sheet 1 of 3 N65023 10-31-05 Rev. A 2005 Cequent Towing Products...
- Página 2 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. Feuille 2 de 3 N65023 10-31-05 Rev. A 2005 Cequent Towing Products...
- Página 3 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York. V.E.S.C. Regulación V-5 y SAE J684. Hoja 3 de 3 N65023 10-31-05 Rev. A 2005 Cequent Towing Products...