Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING:
Inflator fails to operate when plugged in:
1. Thermal break may have "blown".
2. Allow inflator to cool for 25 mintues, then retry.
Inflator does not start:
1. Ensure connection is secure.
2. Make sure connectors and terminals are free of corrosion, debris, etc.
Inflator runs but does not inflate:
1. Be sure the connector is tightly screwed on the valve stem as far as possible.
2. Check tire for leaks, and check hose for breaks and leaks at fittings.
Inflator runs slowly:
1. Overheated from excessive use, shut it off and allow to cool for 25 minutes
2. Voltage too low, check condition of battery
NOTE: If tire is totally deflated, it is possible that the tire could separate
from the rim allowing air to leak out when trying to inflate. In the event this
situation occurs, you will have to jack up the tire prior to inflation.
CAUTION: Keep inflator out of reach of children. Always use a tire gauge to
check the actual pressure in tires. Do not over-inflate tire.
Visit www.slime.com for instructions to mount inflator to vehicle.
Warranty: For the period of one year from date of purchase, manufacturer guarantees that this Product will meet the
specifications when used as directed. Manufacturer's sole liability and Customer's sole remedy under any warranty
claim is limited to refund of purchase price or new product upon return of unit and proof of purchase.
QUESTIONS OR COMMENTS: Call +1-805-489-0490 or visit www.slime.com
ITW Global Tire Repair • 125 Venture Drive, Suite 210, San Luis Obispo, CA 93401 USA
Slime® is a trademark of Illinois Tool Works, Inc., registered in the U.S. and other countries.
Publicidad
