Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON A
HARD, CLEAN SURFACE.
1. DO NOT run vehicle while inflator is operating. You may need to be in
"accessory" or "on" position. Please make sure emergency brake is set and car is in
park. Always ensure air hose chuck touches the core of the valve stem for proper
inflation.
2. DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool
approximately 25 minutes between uses. Do not leave inflator unattended.
3. ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
4. Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be
careful not to inflate items beyond their capacity.
5. While operating, never block the inflator input or output.
6. Keep inflator out of reach of children.
7. For use with 12 volt DC power outlets rated 15 amps or higher. Do not use with older 8
amp cigarette lighter receptacles.
TO INFLATE TIRES:
1. Attach twist-connect air fitting to
inflator, then screw the opposite
end connector onto tire's valve stem
2. Attach battery clips to battery,
positive side first.
3. Switch inflator "ON",
and inflate tire to manufacturer's
recommended air pressure.
When proper pressure is reached, turn off
inflator and disconnect power cord, ground
side first.
Publicidad
