Descargar Imprimir esta página

Slime SMART SPAIR Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: HOT • DO NOT HOLD IN HAND WHILE OPERATING • PLACE INFLATOR ON A
HARD, CLEAN SURFACE.
1. DO NOT run vehicle while inflator is operating. You may need to be in "accessory" or "on" position.
Please make sure emergency brake is set and car is in park. Always ensure air hose chuck touches
the core of the valve stem for proper inflation.
2. DO NOT use inflator continuously for more than 10 minutes. Allow unit to cool approximately 25
minutes between uses. Do not leave inflator unattended.
3. ALWAYS use a pressure gauge to check tire pressure. DO NOT overinflate.
4. Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be careful not
to inflate items beyond their capacity.
5. While operating, never block the inflator input or output.
6. Keep inflator out of reach of children.
7. For use with 12 volt DC power outlets rated 15 amps or higher. Do not use with older 8 amp
cigarette lighter receptacles.
WARNING!
This repair kit is only suitable for emergency tire repairs to enable vehicles to be driven to a service
center where proper repairs can be made to the tire. Not intended for use for major tire damage.
Radial ply passenger car tires may only be repaired in the tread area. No repairs are permitted on the
bead, sidewall, or shoulder area of the tire. To prevent injury extreme caution should be used while
using tools. Eye protection should be worn while repairing tire.
SEALANT REMOVAL INSTRUCTIONS:
FOR THE TIRE REPAIR PROFESSIONAL
Slime tire sealant is non-flammable and water based so clean up is simple. The sealant
should be rinsed or wiped out of the tire prior to making a permanent repair. Should any
sealant fall on the shop floor, simply wipe it up with a rag and rinse off the area with
water. If TPMS sensor present, wipe sensor with damp rag prior to reinstallation. This
sealant will not corrode or negatively affect the rim or tire.
WARRANTY: For the period of one year from date of purchase, manufacturer guarantees that this Product will meet the
specifications when used as directed. Manufacturer's sole liability and Customer's sole remedy under any warranty
claim is limited to Manufacturer's coupon upon return of proof of purchase.
QUESTIONS OR COMMENTS: Call (888)457-5463 or visit www.slime.com
ITW Global Tire Repair • 125 Venture Drive, Suite 210, San Luis Obispo, CA 93401 USA
Slime® is a trademark of Illinois Tool Works, Inc., registered in the U.S. and other countries.

Publicidad

loading

Este manual también es adecuado para:

50107