TANDD ecom Tab-Ex 01 DZ1 Manual Del Usario página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 83
Charging the battery
Use the Safety Box and the Charger socket to charge the battery before using it
for the first time.
L
Use only ecom-approved chargers, batteries, and cables. Unapproved char-
gers or cables can cause the battery to explode or damage the device.
• When the battery power is low, the battery icon appears empty.
• If the battery is completely discharged, the device cannot be turned on imme-
diately when the charger is connected. Allow a depleted battery to charge for a
few minutes before turning on the device.
• If you use multiple applications at once, network applications, or applications
that need a connection to another device, the battery will drain quickly. To avoid
disconnecting from the network or losing power during a data transfer, always
use these applications after fully charging the battery.
Charging with the charger
Connect the USB cable to the USB power adaptor and then plug the end of the
USB cable into the multipurpose jack.
Connecting the charger improperly may cause serious damage to the device.
Any damage caused by misuse is not covered by the warranty.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido