Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
H
OW
After unpacking the blender, wash everything except the
blender base in hot, soapy water. Dry thoroughly. Do not
place in dishwasher. Wipe the blender base with a damp cloth
or sponge. Do not immerse the base in water. Care should be
taken when handling the blades, as they are very sharp.
How to Assemble and Use
Important: Your blender jar and cutting blades are subject to
wear during normal use. Always inspect cutting blades for
broken, cracked or loose blades. If jar or cutting blades are
damaged, do not use. Call our toll-free customer service
number to obtain replacement parts.
Make sure blender is unplugged. Place blender base on
clean, dry surface to keep foreign particles from being
pulled up into motor during operation.
Make sure small gasket is in place on outer rim of blade
assembly. The gasket must lie flat. Screw the blade assem-
bly into the jar base firmly. The large gasket should be in
place on jar bottom, underneath the wide collar.
The blade assembly must be screwed into the jar firmly.
If not, it may loosen when the motor is turned on.
Set jar into place on blender base, making sure it is
securely seated. If not gently rock the jar until seated.
Plug cord into outlet.
Put ingredients in jar, place lid on jar.
Process food or beverages. Place hand on lid when blend-
ing liquids. Push button on control panel to start blender.
Always turn blender OFF and wait until blades have
stopped rotating before removing jar.
To remove jar after blending is complete, lift the jar
straight up. If it is not easily removed, gently rock and lift.
Do not twist.
Never place jar onto unit while motor is running.
4
T
U
Y
O
SE
OUR
S
B
®
UNBEAM
LENDER
Publicidad
Tabla de contenido
