Publicidad
Idiomas disponibles
Idiomas disponibles
Imagine
PROFLEX
12
12,5
17,3
Ø21
2
4
11,3
12
15,1
17
23,3
23
1
7
WARNING
BEFORE INSTALLING THIS PRODUCT, PLEASE READ THE
INSTRUCTIONS CAREFULLY AND STORE THEM IN A
SAFE PLACE.
THE INSTALLATION SHOULD BE CARRIED OUT BY
TRAINED STAFF.
INCORRECT HANDLING OF THE PARTS OR THE
LIGHT FIXTURE ITSELF MAY IMPAIR THE PROPER
PERFORMANCE OF THIS PRODUCT. IN THIS CASE,
THE MANUFACTURER GUARANTEE SHALL BE DEEMED
VOID.
OBSERVE
PRECAUTIONS
HANDLING
SENSITIVE DEVICES (LED).
5/4
diciembre 2019
11,2
15,9
5
SURFACE
11,1
16
22
8
EMBED
FOR
ELECTROSTATIC
[GRÁFICOS: Unidades en mm/ GRAPHICS: Units in mm/GRAPHIQUES: Unités en mm/GRÁFICOS: Unidades em mm]
12,5
11,1
17,3
16
6
10
12,5
25
18
9
3
WARNING
• This product is made with non-replaceable LEDs.
• This product is class III, the operating voltage of the LED strips is to 24Vdc.
• Disconnect power before installing or handling the product.
• If you find cracks or the product is damaged, please replace it with a new one.
• Do not touch the product when it is running with wet hands.
• Both power supply and regulators are for indoor use, please install them in watertight
boxes IP44 or higher if necessary and protect the connections made thereof,
Presérvelos from moisture and/or water.
• Reserve 20% of the power of the power supply.
• Do not exceed the maximum limit of serial strip connection.
CAUTION
SECURITY CONDITIONS
• To guarantee life and prevent damage to the LED and the environment, it is
recommended not to force, pull or bend the cables while the product is on.
• It must be ensured that each power supply is grounded.
STORAGE
• Please avoid sudden changes in temperature, especially in environments with high
humidity where condensation may occur.
STATIC ELECTRICITY
• Static electricity and voltage spikes damage the SMD flexible strip.
• The use of Antielectrostatic gloves is recommended to handle the LED strip.
• All devices, equipment and machinery must be properly grounded.
• It is recommended that the flexible SMD strip be taken against overvoltages
and over-currents to the mounting equipment.
HEAT GENERATION
• The thermal design of the product is of great importance. Please consider
the heat generated by the SMD flexible strip for the design of the system.
• Higher input power must have better thermal dissipation.
• Strong heat sources should be avoided and must be operated within the
maximum values given in the specifications.
• The working current must be decided after considering the maximum
ambient temperature of the SMD flexible strip.
12,4
12,5
56,7
17,3
12
11
16
16
13
14
CORNER
Publicidad
