Side Panel Base Position - ubabub Pod Instrucciones

c
side panel and
base position
step 1 Select constructed side panel from section B and ensure side with bolt holes
faces towards the inner of the crib.
step 2 rest side on edge of plastic base, aligning bolt holes.
step 3 Starting with the center hole, using 55mm bolts attach side to base –
finger tighten only.
step 4 Insert left and right bolts, finger tighten only.
step 5 Once all three bolts are in place check alignment and tighten with allen Key
Please note: Do not over-tighten.
step 6 repeat steps 1–5 on other side.
6 x 55mm bolt
10