Cequent Performance Products 76004 Instrucciones De Instalación página 5

4. Raise hitch into position and install the provided M14 hex bolts, lock
washers, and flat washers into bottom four (4) existing weldnuts in frame.
See figure 2.
6. Re-install the step bumper using the original four (4) side fasteners.
NOTE: Be sure to align the plastic tube for spare tire mechanism.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
5. Re-install spare tire cradle re-using original fasteners.
Tighten M8 bolts to 20 Lb.-Ft. (28 N*M). See figure 2
7. Reconnect all electrical plugs.
Sheet 5 of 15 76004N
8. Raise spare tire back into position,
if required.
9. Return vehicle bumper support
and bottom four (4) factory bolts
to owner.
10. Tighten all M14 CL10.9 fasteners
with torque wrench to 100 Lb.-Ft.
(136 N*M)
2-9-16 Rev. A