Desoutter SB-AH Serie Manual Del Usuario página 8

6159938801
Issue no: 01
Series: C
© COPYRIGHT 2009, DESOUTTER
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorized parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is designed for installing and
removing threaded fasteners in wood, metal and
plastic.
No other use permitted.
For professional use only.
The use of spare parts/accessories other than
those originally supplied by the manufacturer
may result in a drop in performance and/or
increased maintenance / noise level / vibrations,
and as the result, the full cancellation of the
manufacturer's liability.
Noise and vibration declaration statement
Sound pressure level (dBA) : 72 ± 2
(EN ISO 15744).
Vibration Level (m/s²) : < 2,5 (ISO 8662/1).
These declared values were obtained by
laboratory type testing in compliance with the
stated standards and are not adequate for
use in risk assessments. Values measured in
individual work places may be higher than the
declared values. The actual exposure values
and risk of harm experienced by an individual
user are unique and depend upon the way the
user works, the work piece and the workstation
design, as well as upon the exposure time and
the physical condition of the user.
8 / 52
Ø6mm (1/4")
3m
Additional Vibration Information:
For making rough estimates of daily vibration
exposures, useful information may be found in
CEN/TR 15350: 2006, "Mechanical vibration
– Guideline for the assessment of exposure
to hand-transmitted vibration using available
information including that provided by
manufacturers of machinery."
We, Desoutter, cannot be held liable for the
consequences of using the declared values,
instead of values reflecting the actual exposure,
in an individual risk assessment in a work place
situation over which we have no control.
Weight
● 700 g.
LUBRICATION
This is a DRYLINE tool designed to operate on
a totally dry air line i.e. one without any oil or
water moisture. DRYLINE tools can also operate
on a lubricated or partly lubricated air line thus
allowing easy interchangeability with existing
installations.
If lubrication is required an air line lubricator
should be fitted down stream of the filter.
Use ISO VG 15 (27652).
Note: full power is achieved using a lubricated
air supply.
Pmax 6.3 bar
ISO VG15 (27652)
Ø12.5 mm (1/2")
10/2009