Electrical Connection; Technical Specifications - Fagor LVC-12 Instrucciones Generales Para Instalación, Uso Y Mantenimiento

1.1.- Installation diagrams
See Fig.1
1.2.- Positioning
Level and adjust the height of the appliance. (Fig. 2)
1.3.- Water connection
− To be done as shown in figures 3 or 4.
− Dynamic pressure necessary during rinsing: 2 - 4 Kg./cm
− With mains pressures of less than 2 Kg/cm
pump. (Fig.4).
1.4.- Drainage
a) Fix the drain hose as shown in Fig.5.
b) Fit a siphon pipe to prevent bad smells.

1.5.- Electrical connection

− For access to the connection strip (R), (Fig. 6 and Fig. 1), remove the cover (T) and the
rear panel (P). Connect the strip as shown in figure 6. Fix the sheathed cable in (E), leave
enough cable to remove the electrical panel from the front.
− Fit a general switch (I) independent of the appliance with a distance between contacts
equal to or more than 3 mm.
− The machine must be earthed.

1.6.- Technical specifications

Water inlet
MODEL pressure
LVR-10
2÷4 Kg/cm²
LVC-12
(28÷56psi)
LVC-15
3.5÷5
Kg/cm²
LVC-15D
(42÷70psi)
2÷4 Kg/cm²
LVC-21
(28÷56psi
3.5÷5
Kg/cm²
LVC-21D
(42÷70psi)
2÷4 Kg/cm²
LVC-21B
(28÷56psi
1.- INSTALLATION
Power(Kw)
Supply
H. element
voltage
Drum Tub absorb.
1
2,4
2
2,8
2
(3.5 ÷ 5 Kg./cm
2 2
(3.5 Kg./cm )., install an electric pressure
Cycle
Basket
Max duration
(mm)
Min.
2,66 Ø350x350
2 MAX.
(Adjustable)
400x400
3,06
2
(Fixed)
16
2
).
Tub Rinse water
capacity consumpt
(l) (l)
11 2
15 2,5
Net
weig
(Kg)
34
36
39
412