AbleNet TrackerPro 2 Manual De Instrucciones

TrackerPro
www.ablenetinc.com
(800) 322-0956
Getting Started:
1. Place TrackerPro 2 directly in front of the user.
TrackerPro 2 can be attached to a monitor using the
included dual lock or placed on a flat surface using
the included desktop stand.
2. Plug TrackerPro 2 into available USB Type A port on
computer. The Power/Status LED on TrackerPro 2 will
turn red.
3. Place a TrackerPro 2 reflective dot on forehead of user.
4. Position the mouse cursor in the center of the device
screen before the user starts.
5. Position user 12-in to 36-in (30-cm to 91-cm) away
from TrackerPro 2.
6. The Power/Status LED on TrackerPro 2 will turn green
once it detects the reflective dot on the user.
7. Small head movements will move the mouse cursor
on the computer. If the user is unable to move the
mouse cursor across the entire screen, try adjusting
the mouse cursor speed.
Cursor Positioning:
When a user first starts or after using TrackerPro 2 for a
2
™
USB Type A
Connection
Right Mouse Click
Left Mouse Click
period of time, the user may find that the mouse cursor
does not reach the far edges of the device screen. To re-
orient the mouse cursor:
1. The user should move their head as far up and then as
far down as it can go. The mouse cursor may stop and
push up against the edge of the screen on the up or
down movement of the head. Repeat the up and down
motion multiple times. This movement will re-orient
the mouse cursor in the vertical direction.
2. The user should move their head as far left and then
as far right as it can go. The mouse cursor may stop
and push up against the edge of the screen on the left
or right movement of the head. Repeat the left and
right movement multiple times. This movement will
re-orient the mouse cursor in the horizontal direction.
3. If neither of the above steps works to reach the edges
of the screen with the mouse cursor:
a. On the back of TrackerPro 2, turn the small toggle
switch to I
b. On the device, go into the setting for the mouse
tracking speed and turn it up
Power/Status LED
Mouse Click Options:
• Plug one or two switches into TrackerPro 2. The white
switch jack is for left mouse click and the black switch
jack is for right mouse click.
• For use without switches, use a dwell selection
software.
• Windows: Dwell Clicker 2 (purchased separate)
• macOS Mojave or newer: Dwell selection is part
of the accessibility settings for the keyboard
• Google Chrome OS: Dwell selection is part of the
accessibility settings
Mouse Cursor Speed Adjustment:
• On the back of TrackerPro 2, move the speed selector
switch to change mouse cursor speed.
• I = fast
• II = slow
• For more control, find the mouse cursor speed
adjustment within the computer operating system
Speed Select
(On Back)
Dual Lock
Desktop Stand
Updated March 4, 2020 4:40 PM