MZ electronic WHC040 Instrucciones De Uso página 24

Up Alarm
It is possible to enable the function and
establish the height at which the anchor-
winch stops; after which it is only possible to
give pulsed commands.
Settable values: OFF, 0.5 – 1.0 – 1.5 – 2.0 –
2.5 - ... 10.0 (metres or feet).
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with the
pressing (for at least 3 seconds) of the keys
and .
Settable value: OFF, 1,2,3...25 (metres or
feet).
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Exit
To return to the previous menu.
Settings menu
Use the (DOWN) or
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Lite
By enabling this function it is possible to start
the display luminous intensity programming
procedure.
WHC040
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Confirm with
Confirm with
SETTINGS
CONTRAST
LITE
OFF TIME
LANGUAGE
EXIT
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
= Yes = No
3
5
30
ITA
24
English
Rev. 01-2021