Before The First Use; Temperature Selection - Infiniton HWR-60BL Manual De Instrucciones

BEFORE THE FIRST USE

When using the appliance for the first time. Clean it as follows:
Clean the surface with a soft cloth and then dry it.
Pre-heat the empty drawer for at least two hours. Tum the temperature knob to the maximum
setting, in order to eliminate any residual grease, oil, or manufacturing resins which may cause
unpleasant odours during heating.
Air out the room.
Upon completion of this operation, the appliance is ready to be used for the first time.
APPLIANCE CONTROLS
The control elements are the temperature knob and the luminous ON-OFF switch.
With the switch pressed (position 1) the drawer is on, whereas when the switch is released
(position 0) the drawer is off. These parts can be seen only when the drawer is open.
When the drawer is closed, a control light located on the front of the appliance lets you see
whether the drawer is on.
OPERATION
Place the dishes in the drawer
-
Select a temperature
-
Turn on the appliance; the switch will light up
-
Close the drwer gently
-
Turn off the appliance before removing the heated dishes.
-

TEMPERATURE SELECTION

The temperature knob lets you select a temperature between approximately 30℃and 75℃.
Turn the temperature knob clockwise only. Untilthe stop that indicates the maximum setting, and
then coumter-clockwise.
Do not force it beyond the stop, otherwise the themostat will be damaged.
The temperature scale does not show absolute temperatures in ℃,but rather symbols that
represent the best temperature for respective groups of dishes:
5