lauson OM83 Manual De Instrucciones página 6

LAUSON
- REMOVE THE STYLUS PROTECTOR.
- ENSURE THAT THE TONEARM IS DETACHED FROM THE
-
TONEARM REST PART BEFORE OPERATING AND RE-
SECURED AGAIN AFTERWARDS.
- - PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE
ARM FROM THE ARM PARK, AND THEN SLOWLY MOVE IT
TO THE RECORD SIDE. THE PLATTER WILL START TO
ROTATE.
PUT DOWN THE LIFT LEVER TO DROP THE TONE ARM
-
AND TOUCH THE RECORD GENTLY. PHONO PLAYING
STARTS NOW.
- PUSH THE LIFT LEVER UPWARD TO RAISE THE TONE ARM
FROM THE ARM PARK, NOW PLATTER WILL STILL BE
ROTATING BUT PHONO PLAYING WILL STOP. TO
CONTINUE THE PLAYING, THE USER NEEDS TO PUT
DOWN THE LIFT LEVER.
PRESS 33RPM SPEED SELECT OR 45RPM SPEED SELECT
-
BUTTON DEPENDING ON THE RECORD TO BE PLAYED,
BUTTON INDICATOR WILL LIGHT UP.
TURN START / STOP SWTICH TO STOP TURNTABLE FROM
-
ROTATING OR RESUME TO WORK.
- STROB DOTS ON THE TURNTABLE PLATTER FOR SPEED
CHECKING. UPPER ROWS OF BIGGER DOTS FOR 33RPM,
UPPER ROWS OF SMALLER DOTS FOR 45RPM. ADJUST
SPEED BY PITCH CONTROL SLIDER (+/-10%) IF NECESSARY.
SUITABLE DOTS WILL KEEP STABLIZED UNDER STROB
LIGHT IF THE SPEED IS CORRECT.
- USE THE 45 RPM ADAPTOR IF REQUIRED.
AT THE END OF RECORD, THE PLATTER WILL
-
AUTOMATICALLY STOP ROTATING, TONE ARM WILL
AUTOMATICALLY RETURN TO THE TONE ARM REST PART.
TRIGGER THE EJECT SWITCH DURING RECORD PLAYING,
-
TURNTABLE WILL STOP GENTLY AND TONE ARM WILL
UTOMATICALLY RETURN TO THE TONE ARM REST PART.
LINE OUT SOCKET
THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. ACTIVE AMPLIFIER AND SPEAKER)
-
BY RCA LINE-OUT SOCKET AT REAR CABINET.
CONNECT EXTERNAL DEVICE (EG. ACTIVE AMPLIFIER AND MIXER) WITH GROUND LEAD IF NECESSARY.
-
CONNECTING TO A COMPUTER FOR RECORDING
BEFORE GETTING START, PLEASE INSTALL THE " AUDACITY " RECORDING SOFTWARE ONTO YOUR
COMPUTER. BELOW IS AN EXAMPLE USING A COMPUTER WITH MICROSOFT XP AND THE AUDACITY
SOFTWARE INSTALLED. FOR OTHER WINDOWS OS OR MAC OS, PLEASE VISIT AUDACITY WEBSITE FOR
OM83
TURNTABLE
6
EN